|
KCF series fluoroplastic magnetic pumpKCF series fluoroplastic magnetic pump and CQB-F series fluorine-lined magnetic pump work in the same principle, the driving device is directly installed on the motor shaft by means of active magnet coupling, the pump room is closed, through magnetic coupling indirect drive on the pump shaft with magnet impeller rotation structure, compact structure, safe and energy-saving. However, on the basis of the CQB-F series fluorine-lined magnetic pump, the in-depth improvement and optimization, coupled with the application of a variety of new materials, fills the defect that the CQB-F magnetic pump cannot transport solid particles and crystalline liquids, and the operation is more stable and efficient, and the service life is longer. Although the liquid contact part of the pump body is fluoroplastic, the pump housing is made of metal, so the pump body is strong enough to withstand the weight of the pipe and withstand mechanical impact.
Collect
Design features: KCF series fluoroplastic magnetic drive centrifugal pump adopts magnetic coupling transmission, and the leak-proof design cancels the shaft seal, eliminates the trouble of dripping, and does not pollute the use site. It is our company combined with many years of industry experience and market research, on the basis of the traditional fluoroplastic magnetic pump for in-depth improvement and optimization, following the advantages of the traditional fluoroplastic magnetic pump while improving the flow channel, impeller and internal and external magnetism, canceling the back cover structure, the rotating parts from single support to double support, magnetic material selection is more scientific, to avoid the generation of magnetic eddy current. The efficiency and stability of the pump are improved. Its overflow parts are made of fluoroplastics and high-purity technical ceramics. It has excellent corrosion resistance and sealing, and can continuously convey any concentration of acid, alkali, strong oxidant and other corrosive media without damage.
Performance range Flow: 0.5~200m3/h Head: 8~80m Operating temperature: -20°C~120°C, using new materials to withstand up to 180°C Production execution standard: JB/T7742-2013
Model significance
Performance parameters
Selection Notes
Attention to selection 1. If the liquid contains solid particles or crystals, please choose KRCB stainless steel magnetic pump; 2. Valves need to be installed in the inlet and outlet pipelines of the pump, and the valves of the inlet pipelines are fully open normally and closed during general maintenance. The outlet pipeline valve is used to regulate the flow rate, and the outlet pipeline should be equipped with a check valve, if the check valve is not installed, the outlet pipeline valve should be closed before stopping the pump to prevent water hammer from damaging the pump; 3. The long-term operating flow rate should be 35%~110% of the rated flow rate of the pump, and too high or too low will affect the service life of the pump; 4. When the density of the conveying medium exceeds 1250kg/m3 (slightly different pumps), it is necessary to inform the sales department of our company that the magnetic coupler needs to be designed separately, and the power of the supporting motor needs to be adjusted; 5. The composition of the conveying medium should be informed to the sales department of our company, so as to select more suitable parts and materials.
List of consumables
Areas of application KCF fluoroplastic magnetic pump is widely used in: petrochemical industry, acid and alkali production, non-ferrous metal smelting, pickling process of automobile manufacturing, rare earth separation, pesticides, dyes, medicine, papermaking, electroplating, radio and other industries. In particular, the transportation of valuable, rare, volatile, flammable and explosive, toxic and solvent liquids. |
